IBC adapter + 1/2" outlet tap with two connections

For mounting on an IBC rainwater tank with approx. 60 mm coarse thread*

Outlet tap/housing brass CW617N nickel-plated.
Brass ball CW617N, hard chrome plated, with PTFE sealing rings.
Spindle brass CW614N with O-ring NBR.
Lever: Steel, painted blue.
Nickel-plated hose fitting with NBR sealing ring and plastic insert
for concentrated media discharge.

Dimensions: Screw connection 1/2", 2 x 3/4" male thread, 1 x outlet nozzle similar to Gardena, 1 x outlet nozzle 1/2", union nut 3/4".
Inner diameter approx. 14 mm,
Offset approx. 10 mm.
Maximum operating pressure: 10 bar

*Note: If your tank has a fine thread or a larger diameter outlet,
You can also use a single tap. By inserting it into your
Drill a corresponding hole in the screw cap of the outlet using a Forstner bit.
and attach the tap we supplied using the included lock nut.
Screw cap, plastic, blue, with 3/4" female thread (does not fit IBCs with crossbar)
(at the front edge of the thread on the factory-installed tap).